SynthHD – 13.6 GHz Dual Channel Microwave Generator

synthHD-570×700
synthHD-570×700-2synthHDsynthHD

SynthHD – 13.6 GHz Dual Channel Microwave Generator

$1,299.00

*NEW* SynthHD: A 54MHz – 13.6GHz USB Controlled Dual Channel RF Signal Generator.

SEE DETAILED INFORMATION BELOW

SKU: SynthHD Category:

Product Description

Microwave Signal Generator, Dual Channel – SynthHD

The Windfreak SynthHD RF Signal Generator brings in a new era of low cost Microwave Signal Generation.

HD stands for HIGH DEFINITION:

  • 54 MHZ to 13.6 GHZ in 0.1 Hz steps
  • -50 dBm to +20 dBm (typical) in 0.01 dB steps
  • Set each channel to independent frequencies, amplitudes and coherent phases
  • 0 to 360 degrees relative channel to channel phase control in 0.01 degree steps
  • Pulse, AM and FM modulation including FMCW radar chirp
  • Linear and list mode (frequency hopping) sweeps include dual channel differential sweeps
  • Save all settings to the device for use without a PC
  • 32 bit ARM processor on board which is Arduino compatible (Teensy 3.1)
  • Digital schematics and complete Labview GUI source code included with purchase
  • Windows, Linux and Android compatibility
  • Designed and manufactured in the USA with maximized value / cost ratio

Downloads for SynthHD:

  1. Datasheet
  2. Software Users Guide
  3. Linux & Windows Command Line Guide
  4. SynthHD Press Release

microwave-signal-generator

SynthHD Software GUI (Labview source code included with purchase)

microwave-signal-generator-sw1

The following video shows the SynthHD doing a Pulsed FM Radar Chirp (FMCW) that is simultaneously AM modulated.

The video below is taken with both channels driven into a mixer. The mixer is then fed into an oscilloscope and displayed on the right side of the video. The signal shows the DC and near DC downconverted component. The DC level depends on the phase relationship between the two channels. The switch on the far right of the GUI toggles between controlling channels (RFA or RFB). For orders over 10 units discounts will apply. Request a quote here. Emails will be answered within 24 hours. Keep an eye on your SPAM folder. You will be given a lead time and a quote if you desire large volume.

Additional Information

Weight .625 lbs
Dimensions 7 x 5 x 2 in